SWITCH POE 16 PUERTOS

Model: VM-SW16P2G-200W

Features

16-Port 10/100Mbps IEEE 802.3af/at PoE Switch (End-Span PSE)

•Comply with IEEE802.3, IEEE802.3u, IEEE802.3af/at standards

•Support IEEE802.3x full-duplex flow control; support Auto MDI/MDIX

•Provide 15.4W or 30W power to powered devices

•200 watts PoE budget

•Built-in 200W power supply

•Gigabit uplink port: 2 *10/100/1000Mbps RJ-45 

•PoE data & power transmission distance up to 100meters

•Port based VLAN for Enhancing Security

•Transmission distance max up to 250 meters when VLAN is enabled

•Backplane Bandwidth: 7.2Gbps

•Restart function helps master IC reset wholly

•Excellent anti-thunder, anti-static and anti-interference ability

•Surge Protection: 2KV

•Easy and convenient to use, plug & play, no need to configure

•Galvanized housing for stable and durable working life

Overview

The VM-SW16P2G-200W provides 16 port 10/100Mbps IEEE 802.3af/at Power over Ethernet with a total of 200 watts of PoE budget, which is an ideal solution to fulfill the demand

of sufficient PoE power for network applications.

The VM-SW16P2G-200W is an ideal solution for securing IP surveillance infrastructure. It provides both 802.3af/at PoE functions along with 16x10/100Base-TX ports featuring

15.4-watt-802.3af/30-watt 802.3at PoE in RJ-45 interfaces and extra 2 x 10/100/1000Mbps UPLINK RJ-45 Ports to keep a cascade connection with another switch or NVR. For

instance, one VM-SW16P2G-200W can be combined with one 16 Channel NVR and 16 PoE IP cameras as a kit for the administrators to centrally and efficiently manage the

surveillance system in the local LAN and the remote site via Internet.

The VM-SW16P2G-200W RJ-45 interfaces support 10/100Mbps Auto-Negotiation at downlink port from 1 to 16 and uplink port from 1 to 2 for optimal speed detection through

RJ-45 Category 6, 5e or 5 cables. It also supports standard Auto-MDI/MDI-X that can detect the type of connection to any Ethernet device without requiring special straight or

crossover cables.

The

VM-SW16P2G-200W supports port-based VLAN function, which effectively prevent the whole system from internet broadcast storm to make the data transfer much safer.

When the VLAN mode is enabled, the data cannot be forwarded among DOWNLINK RJ-45 ports, but DOWNLINK ports and UPLINK RJ-45 port can communicate with each other.

The bandwidth of DOWNLINK RJ-45 port is forced to 10Mbps mode to adapt to long distance transmission of max 250meters. The bandwidth of UPLINK RJ-45 port is still 100Mbps.

With data and power over Ethernet formed one unit, the VM-SW16P2G-200W reduces cabling requirements and eliminates the need for dedicated electrical outlets on the wall,

ceiling or any unreachable place. A wire that carries both data and power can lower the installation costs, simplify the installation effort and eliminate the need for electricians or

extension cords. Providing 16 PoE interfaces, the VM-SW16P2G-200W is ideal for small businesses and work-groups requiring deploying the PoE for the wireless access points,

IP-based surveillance IP phones in any place easily, efficiently and cost-effectively.